Our Pro Series Mid (ProM) pumps are designed for mid volume/head applications that call for a balance of head and volume. They can be self-installed or using a local installer. Over 400ft see Pro Series Deep, over 50 GPM see Pro Series Volume.
Pro Series Mid systems use hearty 3-Phase Motors and 3.9″ Pump Ends. Our controllers are the best in the world and allow customization and optimization based on sun and season. Easily switch between solar and another 220V backup power source when the sun isn't shining, like a generator or grid power, using the Pro Controller autoswitching feature.
Find out more about all the ways you can use a submersible pump on our install diagram page.
Systems Include: - Brushless Submersible Motor (3 Phase 220v, 3.9” Diameter) - 2.2 kW Rated Solar Controller (takes DC Voltage from Solar Panel array +Auto-Switch to run with 220v Grid or Generator when not enough solar) - Large Float Switch for use as high water tank sensor - Stainless Steel Pump End (sized to your well and water needs) - Solar Array in Mono/Poly Aluminum-framed UL Solar Panels - All connector cables from solar panels to controller - Built In No-Slam Check Valve - DC cut-off disconnect switch rated for your array, plug and play with MC4s - Simplified Wiring Diagrams for easy hookup - Phone & Email support before and during installation - 2 Year Comprehensive Warranty
Unlike our line of 3'' Submersible Pumps, like the RPS 200, 400, 800, the surface pump TPP or even our Grid-less Sump Pump, the Pro Series is not compatible with batteries.
Well Pump: 3.9" OD, 1.25" Outlet ~30lbs Controller: 16” x 16” x 4”, ~22lbs
We feel it important to mention that our team is not on commission so expect our help, not pressure to purchase. Our job is to help get you water, not sell you something that isn't a good fit for you or your well. It's why thousands of American farms & ranches trust RPS.Note from RPS co-owner Mike.
Rather a Friendly voice? Our famous support team is here to help!
Everything went just fine. Customer Service was fantastic. Dropped the pump 160 feet and then ran the electrical to the panels another 100 feet away. Then ran the poly pipe from the well head 170 feet into my 3 acre lake and it’s pumping away! I did it all by myself and your instructions and videos made it a breeze!!! Very satisfied customer.
C
Customer
Thank you RPS!
Here’s some pics of my system , it’s pumping up to a 5000 gallon tank further up the mountain, It’s pumping city water from the 1500 gallon green tank close to the pump site up 200’ to the top tank that gravity feeds the property, the city water only had only enough pressure to reach this location and this is going to be more costs effective than running my well off a propane generator that’s what I’ve been doing since 2005 , so this is a huge improvement and it’s working great! thank you RPS
Dillon, CA
Water!
It's shoooooting into the tank! It's *#$@-ing beautiful!