< Return to Homepage of RPS Solar Pumps | 888-637-4493

"Time Is Money" Turnkey Kit for Quicker & Easier Installs
"Time Is Money" Turnkey Kit for Quicker & Easier Installs
"Time Is Money" Turnkey Kit for Quicker & Easier Installs
"Time Is Money" Turnkey Kit for Quicker & Easier Installs

"Time Is Money" Turnkey Kit for Quicker & Easier Installs

RPS Solar Pumps - Turnkey

Regular price $899.00 $699.00 Sale

Short on time? In a remote area without access to a hardware store? Get everything you need to install an RPS Solar Pump right to your doorstep. US Record holder: 1hr 7min from opening boxes to pumping water. CS, Missouri

Comes in 100ft, 200ft and 300ft kits.

Standard RPS Systems vs. Turnkey Table

Don't need a mount for the panels because you're building your own? Check out our HALF TURNKEY, includes everything listed below for installation but the mounting.   


Turnkey Kits include... 

Wire

  • Pump Wire - Outer jacketed (12-3 AWG)
  • Sensor Wire (2 Strand)
  • Polypropylene rope (no decay) to attach to pump as safety line
Plumbing
  • Poly Pipe rolls 160psi (3/4" or 1" IPS)
  • Well seal assembly (4", 5" 6") with PVC barbed insert below, threaded nipple, and threaded elbow
  • Hose clamps for the barbed couplings
  • Teflon tape
  • Electrical tape
Mounting
  • Adjustable Tilt Top-of-pole Mounting kit for Solar Panels (Customer to supply 2-3/8” OD or 4.5" OD schedule 40 steel pipe for mounting - RPS 200 Kit comes standard with 1x 2Panel mount on 2-3/8" OD steel post, RPS 400, 400V, 400N with 1x 4Panel mount for 4.5" OD steel pipe. RPS 800V, 800 with 1x 8Panel mount 4.5in OD steel pipes. RPS 600 can purchase the RPS 800 Turnkey kit and have extra room for 2 more panels later! Customer to supply mounting pipe.)
  • Simple Mounting hardware to attach Controller to post
  • Grounding wire and clamp for use with standard grounding rod 


Tools & Equipment you’ll still need on hand for the quick install:
  • Wire stripper/crimper
  • Flat and Phillips Screwdriver
  • Lighter or heatgun for heatshrinks, heating poly pipe for tighter hose clamps
  • 2 3/8" OD steel pipe for RPS 200 using 2 panel mount OR  4.5" OD steel pipe for RPS 400, 400V, 400N, RPS 800 and 800V using 4 or 8 panel mounts. 
  • Small socket set as it helps get hose clamps tighter
  • Bag(s) of cement for post holes and something to dig them!
  • 4' or 8' 5/8" Grounding rod (not vital on install day, but encouraged)
  • Simple Multimeter for testing DC voltages 

Customer Reviews

Based on 1 review Write a review

Customer Reviews

Based on 18 reviews
94%
(17)
6%
(1)
0%
(0)
0%
(0)
0%
(0)
C
Customer
Install was a breeze!

Installation was a breeze. The instructions were very clear and helpful for someone with little solar experience. The equipment arrived within the week and was packaged well. I got a couple of extra hands and accomplished installation in a few hours. The turn key kit saved a lot of time that might have been spent going to town for necessary parts.

C
Customer
Love the Turnkey

I am very happy with the Turnkey Kit!

C
Customer
Easy install!

So far so good. Took me 2 days between mounting the panels and dropping the pump down the hole. It was a simple turnkey install. I’m very happy with it.

C
Customer
Love the system!

Even through crazy rain & hail, the pump and panels persevered!

B
Brett M.
We are up and running

Everything worked perfectly! I would be interested in installing these for anyone! Brett Martin